Technical Specification | |||||
Model | DH-LR2218-16ET-240 | ||||
Ethernet Port | 2*10/100/1000 Base-T 2*1000 Base-X (Combo ports) 16*10/100 Base-T (PoE power supply) |
||||
PoE Power Consumption | Port1 and port 2 support Hi-PoE 60W Each power≤30W, Total≤240W |
||||
PoE Protocol | IEEE802.3af, IEEE802.3at, Hi-PoE | ||||
Switching Capacity | 8.8Gbps | ||||
Packet Forwarding Rate | 5.36Mpps | ||||
Packet Buffer Memory | 2.75Mb | ||||
Application Humidity | 10%~90% | ||||
Power | AC100-240V, 50/60Hz | ||||
Lightning Protection | 5Common Mode 4KV Differential Mode 2KV |
||||
Working Temperature | ﹣10°C~55°C | ||||
Weight | 3.12kg | ||||
Dimension(W×D×H) | 440mm x300mm x44mm | ||||
Transmission Performance: | |||||
ePoE Power Supply Specifications (CAT) | |||||
Cable | Bandwidth (Mbps) | PoE Load Capacity (W) | Hi-PoE Load Capacity (W) | Working Mode | |
100 | 100 | 25.5 | 53 | IEEE/E100 | |
200 | 100 | 25.5 | 47 | E100 | |
300 | 100 | 25.5 | 32 | E100 | |
400 | 10 | 23 | 26 | E10 | |
500 | 10 | 20 | 20 | E10 | |
800 | 10 | 13 | 13 | E10 | |
ePoE switch power supply voltage 51V CAT5E/CAT6, max. DC resistance < 10Ω/100m |
|||||
ePoE Power Supply Specifications (RG59 Coaxial Cable) | |||||
Cable | Bandwidth (Mbps) | PoE Load Capacity (W) | Hi-PoE Load Capacity (W) | Working Mode | |
100 | 100 | 25.5 | 52 | IEEE/E100 | |
200 | 100 | 25.5 | 48 | E100 | |
300 | 100 | 25.5 | 30 | E100 | |
400 | 100 | 20 | 23 | E10 | |
500 | 10 | 16 | 16 | E10 | |
800 | 10 | 10 | 10 | E10 | |
ePoE switch power supply voltage 51V. RG-59, max. DC resistance < 5Ω/100m. |
|||||
Service Characteristics | |||||
Model | DH-LR2218-16ET-240/td> | ||||
System | Username / password: admin/User Define IP Address :192.168.1.110/24 |
||||
PoE Budget | 240W | ||||
MAC Table | 4K | ||||
VLAN | 802.1Q Standard VLAN | ||||
Spanning Tree | STP, RSTP | ||||
Port Aggregation | Static link aggregation, LACP | ||||
Mirroring | Support many-to-one port mirroring | ||||
DHCP | Support DHCP-Client | ||||
Long Distance Mode | Extend the maximum distance from 100m to 800m | ||||
Flow Control | Support half-duplex based on back pressure type control; Support full duplex based on PAUSE frame |
||||
Security Features | Hardware supports IP+MAC binding based on port Support IEEE802.1x port authentication |
||||
System Maintenance | one-key recovery of default Support the updated packet upload Support system logs |
||||
QoS | Support high and low priority, WRR Support 802.1P, DSCP Support priority according to protocol |
||||
Network Management | WEB(http and https protocol) Support SNMP V1/V2C/V3 |
||||
PoE Management | Support PoE power consumption, PoE on/off of IPC configura-tion, power down when exceeding the value of overload power Support PoE event statics Support Green PoE Support Legacy Support |
||||
ePoE switch power supply voltage 51V. RG-59, max. DC resistance < 5Ω/100m. |
|||||
Accessories | |||||
SFP Module | Description | ||||
PFT3950 | 1.25G 850nm,500m,LC, Multi-mode | ||||
PFT3960 | 1.25G 1310/1550nm,20km,LC, Single-mode | ||||
PFT3970 | 1.25G 1550/1310nm,20km,LC, Single-mode | ||||
EoC (Ethernet over Coax) | Description | ||||
LR1002 | 1*10/100 Mbps Base-TX + 1*BNC RG59 coaxial cable: 400m/100Mbps, 1000m/10Mbps |
LR2218-16ET-240
16-Port PoE Switch with 8-Port ePoE
Features:
- Supports long distance PoE transmission up to 800m with ePoE technology of Dahua
- Layer-two web managed ePoE switch
- Port 1-8 support three self-adaptive transmission modes which are IEEE, E100 and E10
- Port 1-8 support both twisted-pair transmission and coaxial cable transmission
- Support web management: port management, 802.1Q VLAN, STP/RSTP, LACP, 802.1X, QoS
- Support PoE management, Green PoE, Legacy Support
- Conform IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards
Not available.
Not available.